Brinell Hardness Tester, Vickers Hardness Tester, Broaching Machine, Torsion Testing Machine, Spring Testing Machine, Non Destructive Testing Equipment, NDT Equipments, Mumbai, India
 

   Brinell Hardness Tester

Model - B3000 (J) Model - B3000 (H)
Model - B3000 (O)


Model B - 3000(H) :
Machine designed with a hydraulic power pack & control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilitates production testing within tolerance limits by compression method.

Model B - 3000(O) : Basic Machines design & operation similar to B-3000(H). In addition, an 'optical device' with 14x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indenter swivels and projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression. This gives real Brinell number on production testing.

Model B - 3000(J) : Simplest model of Brinell Hardness tester with mechanical design, loading, unloading manual, best suitable for testing batch quantities.

Brinell Hardness Testers Model B-3000(H), (O) & (J) are precision engineered confirming to IS : 2281 - 1983, BS : 240 and 240 and ASTM : E 10, however B-3000 (H), (O), (J) are most suitable for production testing. These machines are designed to measure hardness of casting, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape.

 

Technical Data :

MODEL UNIT B 3000 (H) B-3000 (O) B-3000 (J)
Loads   500 to 3000
stages of 250
500 to 3000 in
stages of 250
500 to 3000 in
stages of 250
Initial Load kgf 250 Nil Nil
Max. test height mm 410 380 254
Depth of Throat mm 200 200 150
Max. depth of elevating
screw below base
mm 180 180 0
Size of base mm 370 X 670 370 X 670 255 X 495
Machine Height mm 1127 1185 860
Net Weight (Approx) kg 450 500 210
Drive Motor HP 0.33 - 415 v/p 033 - 415 v/p Nil

Standard Accessories :

MODELS B - 3000 B 3000 (H) B-3000 (O) B-3000 (J)
Testing table 200 mm Ø 1pc. 1pc. 1pc.
Testing table 70 mm. Ø with 'V' groove for
round jobs - 10 to 18 mm dia.
1pc. 1pc. Nil
Ball holder 5 mm. 1pc. 1pc. 1pc.
Ball holder 10 mm. 1pc. 1pc. 1pc.
Test Block HB - 5 / 750 1pc. 1pc. Nil
Test Block HB - 10 / 3000 1pc. 1pc. 1pc.
Brinell Microscope 1pc. Nil 1pc.
Allen Spanner 7pcs. 4pcs. 4pcs.
Telescopic cover for elevating screw protection 1set 1set Nil
Instruction Manual 1 book 1 book 1 book

Metal  Testing Machines  |  Rubber Testing Machines  |  Plastic Testing Machines  | 
Tape, Paper, Paper Board Testing Machines  |  Metallography Range of EquipmentOther Testing Machines  |

Universal Testing Machines  |  Tensile Testing Machine  |  Hardness Testing Machine  |   Rockwell Hardness Tester  | 
| Brinell Hardness Tester  | Vickers Hardness Tester  |  Broaching Machine | Torsion Testing Machines | Spring Testing Machine |


 
     Designed & Hosted by : MID   Promoted by : GID